Documented case · Egypt · machine-side video
32-Cavity 29/25 PET Preform Mould
This 32-cavity PET preform mould is for a 29/25 neck and a 13 g preform, and it runs on a Yizumi 290-ton injection moulding machine. It was built for a customer in Egypt.
Project overview
32 cavities, 29/25 neck, 13 g, on a Yizumi 290-ton machine.
The published fields are the cavity count, neck, preform weight, 15 s cycle and the machine. Steel, hot runner type and weight tolerance are not in this package. The customer name is not published.
- Cavity count
- 32 cavities
- Mold type
- PET preform mould
- Neck finish
- 29/25
- Preform weight
- 13 g
- Injection machine
- Yizumi 290-ton injection moulding machine
- Target cycle
- 15 s
- Take-out plate
- 4 × 8
- Customer
- Export customer, Egypt
- Project evidence
- Machine-side video and stills
- Project status
- Machine-side video documented case
Take-out
The robot plate is 4 × 8.
With the mould open, the take-out plate sits in the daylight. The plate is four across and eight down, one position per cavity. A second frame shows the pins on that plate.
Machine-side record
Opening, take-out, closing.
The clip shows the mould opening, the robot taking the preforms out, and the mould closing. The 15 s figure is the stated cycle for this job. The clip is not used to measure it.
Start with confirmed project data