Documented case · mold, samples and machine-side video
64 Cavity PET Preform Mold
A documented PET preform mold project with confirmed product drawing data, complete-mold photography, trial-sample views and a machine-side motion record.
Project overview
A visual record from the complete mold to trial output.
The supplied package includes high-resolution views of both mold halves, two views of the 64-piece trial sample set, a machine-side photograph and a 31-second machine-side motion record. The product drawing confirms the preform dimensions and weight; process, machine and steel values are from the project owner.
- Cavity count
- 64 cavities
- Mold type
- PET preform mold
- Application
- Mineral water packaging
- Neck finish
- 29/25
- Product dimensions
- 85.30 mm overall length; Ø34 mm maximum neck OD; Ø18.99 mm body OD
- Preform weight
- 14 g ±0.2 g
- Hot runner
- Needle-valve hot runner
- Injection machine
- Yizumi 320T injection molding machine
- Target cycle
- 12 s
- Mold base steel
- 4Cr13H
- Core and cavity steel
- S636
- Project evidence
- Mold photography, trial-sample views and machine-side video
- Project status
- Mold, sample and video documented case
Complete mold evidence
Both mold halves shown upright and at full scale.
The supplied studio photography shows the cavity and core sides, repeated component arrangement, guide system and visible cooling connections without cropping the mold structure.
Trial output evidence
The supplied photographs show the complete 64-piece sample set.
Two supplied views document the clear PET preforms produced for this project. They record the sample appearance and cavity-scale output; dimensional and weight values remain tied to the confirmed product drawing.
Machine-side motion record
The mold shown opening and closing in the machine.
The supplied 31-second recording is presented as a machine-side process record. The footage is not used to infer cycle time, output rate or final acceptance results.
Technical data status
Remaining field held for confirmation.
The technical data above is confirmed from the supplied drawing and project information. The following commercial field remains unpublished until it is confirmed.
- Customer / project nameTo confirm
Start with confirmed project data